| To: | |
|---|---|
| Subject: | [ts-7000] Re: Problem Accessing GPIO on TS-7800 |
| From: | "mikeciaraldi" <> |
| Date: | Tue, 12 Aug 2008 17:02:49 -0000 |
Aha! We just got off the phone with Grant at TS, and the problem was
that we had to compile with the flag "-mcpu=arm9". Now it works!
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: TS-SER4 and RS485, Anouk Ahamitet |
|---|---|
| Next by Date: | [ts-7000] Re: Functions for Peeking and Poking Memory and I/O, mikeciaraldi |
| Previous by Thread: | [ts-7000] Re: Problem Accessing GPIO on TS-7800, mikeciaraldi |
| Next by Thread: | [ts-7000] Dead Board?, mmcdonal2001 |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU