Re: [ts-7000] Eclipse IDE & TS7350 or TS7800

[Ömürhan Akdemir <>]

Why  do you want to run Eclipse IDE on SD card?

Nevertheless, if you want to integrate cross compiler with Eclipse IDE, you should set discovery options from properties. Create a C makefile project without a toolchain. Import your files. Then set compiler invocation command to your cross compiler command. Eclipse should automatically set the paths.

--- On Sat, 8/2/08, yanniepa <> wrote:

From: yanniepa <>
Subject: [ts-7000] Eclipse IDE & TS7350 or TS7800
To:
Date: Saturday, August 2, 2008, 5:55 AM

Hi folks,

I am a newbie and I am looking to get some help setting up my board
(ts7350) before I can start some development.
I was wondering if anybody could help me with the steps I need to
follow in order to run the eclipse available on the 2GB SD card on my
board.

I have looked online but it was hard to find good information about
this. I hope someone could help me with this.
Thanks!

Yan


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___