ts-7000
[Top] [All Lists]

[ts-7000] Re: Reloading Debian onto CF card

To:
Subject: [ts-7000] Re: Reloading Debian onto CF card
From: "d_f_sierra" <>
Date: Fri, 18 Jul 2008 04:40:37 -0000
Hi, I found the distro image that contains 2.4.26-ts11
(ftp://oz.embeddedarm.com/images/debian/debian-sarge-1.11.tar.bz2) and
loading that onto the CF card solved the initial 3 modprobe errors
(SCSI Subystem 1.0 message appeared instead). Now I am left with the
missing file system entry/node error message. Can anyone give me any
clues on what might be causing this and/or how to fix this?
Thanks,
David



--- In  "d_f_sierra" <> wrote:
>
> I need to reload Debian onto the CF card that came with my Develpment
> Kit. I tried re-making the ext2 filesystem on the CF and then
> untarring the Debian bz2 distro onto the CF. However, when I put the
> CF back into the TS-7200, I receive the following error message:
> 
> =======================
> Started device management daemon v1.3.25 for /dev
>  /dev/ide/host0/bus0/target0/lun0: p1
> modprobe: Can't open dependencies file
> /lib/modules/2.4.26-ts11/modules.dep (No
> such file or directory)
> modprobe: Can't open dependencies file
> /lib/modules/2.4.26-ts11/modules.dep (No
> such file or directory)
> modprobe: Can't open dependencies file
> /lib/modules/2.4.26-ts11/modules.dep (No
> such file or directory)
> 
> The device node /dev/sdcard0/disc0/part3 for the root filesystem is
> missing,
> incorrect, or there is no entry for the root filesystem
> listed in /etc/fstab.
> 
> The system is also unable to create a temporary node in
> /dev/shm to use as a work-around.
> 
> This means you have to fix this manually.
> 
> CONTROL-D will exit from this shell and REBOOT the system.
> 
> Press enter for maintenance
> (or type Control-D to continue):
> =============================
> 
> The distro on the CD is debian-sarge and the CF is 1GB.
> 
> Does anyone have any clues as to what is wrong and how to fix it?
> 
> Thank you,
> David
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU