On 8-Jul-08, at 12:26 PM, Fred wrote:
> --- In Rod <> wrote:
>
> > No there isn't a shell running as I'm accessing
> > the 7400 with ssh, but it still might be in the
> > inittab from the default config. Could this inittab
> > entry cause a conflict when the system decides to
> > poll the serial ports?
>
> Well, I don't have the TS-7400, I have the TS-7250
> and TS-7300, both of which exhibit bad serial
> behavior when the interfaces are opened in an
> application and are also listed in inittab. In my
> inittab I have the entries commented out:
>
> #lgn0:12345:respawn:/sbin/getty -L 115200 ttyAM0
> #lgn1:12345:respawn:/sbin/getty -L 115200 ttyAM1
>
> The bad behavior that I was seeing was that my
> application would stop receiving characters, there
> would be missing characters in the datastream coming
> in to the application and then eventually no more
> characters would be received.
>
> Hell, it's worth commenting them out and trying
> to see if that helps provided you can Telnet back
> in and uncomment them. }:-}
>
Also make sure that the redboot console isn't running on the same tty.
I've had issues with that too.
Dave
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|