--- In vigu <> wrote:
>
> Hi All,
>
> I'm quite new using TS 7800 and I'm trying to get a depth data via
> the ADC of 7800, I have seen the 7800tcntl.c program but what I need
> is just the depth data with 2 channels. I'm not pretty sure which
> function to call for the data alone...
Hi,
you don't need to call any function. The sampled data are in FPGA
memory maped to address 0xE8100000.
You can find very good info about the 7800's ADC design and the
ts7800ctl program here:
ftp://ftp.embeddedarm.com/tmp/7800_adc_update/
Regards
Jiri
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|