Hello,
> Any news on the open core release for TS-7800? I am interested in
> accessing the FPGA on the TS-7800 for some custom circuitry.
Unfortunately management hasn't allocated an engineer to implement an
open core yet. I know several customers have expressed interest as well
as there frustration regarding a lack of an open core project. I'll
communicate this to management.
> I don't know how much is left after I instantiate the PC104 interface
> -- any estimates from the TS side on how much resources that requires?
The TS-7800 has a 12,000 LUT Lattice ECP2 FPGA, approximately 80% of the
FPGA is utilized by the default core.
--
Best Regards,
________________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|