[ts-7000] ts 7800 - rs485 - tx enable pin

["s.cavazzoni" <>]

Hi to all,
i'm writing an application over a ts 7800 board.
I need to use the rs-485 driver.
I've writed a test application and it send data correctly (i've 
cleared the bit 15 on registry 0xE800000C, so i can use two rs485 
ports).

I can't receive data over an rs 485 channel. Need i manage a TX 
ENABLER bit? if yes... how? Is it automatically managed by the kernel 
module?

Could I test the 485 serial port with minicom or similar applications?

Thank you



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/