Thanks Peter, I am looking at the 7300 because I don't need the
touchscreen ability and want to use an off the shelf lcd. Are you
aware if it's possible to increase the resolution on the 7300, I
noticed it's 800x600 which is kind of low for driving a modern lcd.
-Thanks.
--- In "PeterElliot" <> wrote:
>
> Hi Mike,
>
> There's a couple of options:
>
> 1. Use a TS-7300 with an external SVGA monitor
> 2. Use the new TS-TPC-7390 with the built in 7" touch monitor
>
> I've been using the 7300, but I'm likely to move to the new 7390 as
> it's much better value than most industrial monitors.
>
> PJE
>
> --- In "mmcdonal2001" <mike.mcdonald0@> wrote:
> >
> > Hello,
> >
> > I am interested in being able to attach a standard LCD monitor to a
> > Technologic ARM SBC for use with Qt as part of the user interface. Is
> > this possible? Any suggestions? I'm hoping to use as large a screen
> > as possible.
> >
> > Thanks.
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|