[ts-7000] Using a SATA harddrive on the TS-7800

["hockeyjo14" <>]

I am trying to connect an SATA hard drive to the TS-7800. My ultimate 
goal is to save lots & lots of generated data to the SATA HD.

Has anyone had any luck connecting a hard drive to the SATA_0 port on 
the TS-7800? I connected the hard drive, powered it, ran dmesg and it 
did not locate it. Searched the /dev for /hda or /sda and found nothing.
Is support for a SATA hard drive available with the shipped 2.6 kernel 
or does the kernel need re-compiled with SATA specific drivers? 

The skeleton TS documentation for the TS-7800 has no mention of how to 
do it.
TIA
 


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/