Hi --
--- In "jirimacku" <> wrote:
>
> Hi Alex,
>
> thank you for your reply,
>
> > When I did use the supplied TS kernels I noticed something similar
> to this
> > behaviour too[1]; the CPU span at 100% in the kernel task linked to
> the SD
> > card, the serial port stop responding and then after a short time it
> would
> > come back.
>
> In my case the CPU does not span 100%, but the locked processes are
> locked forever.
>
> > Might be talking about JFFS2 but you'll get your answer here:
> >
> > http://www.linux-mtd.infradead.org/faq/jffs2.html#L_stick_jffs2
>
> I will have a look.
>
> Bye
> Jiri
>
Can you both report your details of this to TS? See discussion (near
the bottom):
http://tech.groups.yahoo.com/group/ts-7000/message/11886
(Sorry I can't contribute trying to replicate, I don't have a TS-7800 yet)
Regards, ........ Charlie
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|