| To: | <> |
|---|---|
| Subject: | RE: [ts-7000] RS-485 over TS-7800 |
| From: | "James Bridson" <> |
| Date: | Wed, 11 Jun 2008 19:29:42 +0100 |
> i've buyed a ts-7800 board and i need to use rs-485 serial controller
> (i've ordered it with optional rs485 feature).
-- snip --
> I need to make others device? I'm wronging something? what is the
right
> device for first rs485 port and what for second rs485 port?
I am also using RS-485 on a TS-7800. I am loading the tsuart7800 module
and then using /dev/ttts2 with no issues.
James
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Building your own kernel: why does it behave different, wimpunk |
|---|---|
| Next by Date: | Re: [ts-7000] RS-485 over TS-7800, Michael Schmidt |
| Previous by Thread: | [ts-7000] RS-485 over TS-7800, s.cavazzoni |
| Next by Thread: | [ts-7000] Re: RS-485 over TS-7800, s.cavazzoni |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU