Hi Razvan,
yes i've tried with /dev/hda1 (as in the manual)
but with this happens the same, te continuous rebooting... now that i
check again :)
i copy again the messages, now with the /dev/hda1 config on fstab:
------------ --------- --------- --------- --------- --------- -
hda: SanDisk SDCFH-256, CFA DISK drive
ide0 at 0x8d000000-0x8d0000 07,0x88400006 on irq 32
hda: attached ide-disk driver.
hda: task_no_data_ intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_ intr: error=0x04 { DriveStatusError }
hda: 501760 sectors (257 MB) w/1KiB Cache, CHS=980/16/32
Partition check:
/dev/ide/host0/ bus0/target0/ lun0: p1
TS-7200 flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 3 MTD partitions on "TS-7200 flash":
0x00000000-0x000200 00 : "TS-BOOTROM"
0x00020000-0x006200 00 : "Linux"
0x00620000-0x008000 00 : "RedBoot"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending DHCP requests .., OK
IP-Config: Got DHCP answer from 192.168.1.1, my address is
192.168.1.103
IP-Config: Complete:
device=eth0, addr=192.168. 1.103, mask=255.255. 255.0,
gw=192.168.1. 1,
host=192.168. 1.103, domain=(...) , nis-domain=( none),
bootserver=192. 168.1.1, rootserver=192. 168.1.1, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
/dev/ide/host0/ bus0/target0/ lun0: p1
/dev/ide/host0/ bus0/target0/ lun0: p1
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing init memory: 72K
INIT: version 2.86 booting
Creating extra device nodes...done.
Started device management daemon v1.3.25 for /dev
/dev/ide/host0/ bus0/target0/ lun0: p1
Checking root file system...
fsck 1.37 (21-Mar-2005)
e2fsck 1.37 (21-Mar-2005)
/dev/hda1 has gone 49710 days without being checked, check forced.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 3A: Optimizing directories
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/hda1: ***** FILE SYSTEM WAS MODIFIED *****
/dev/hda1: ***** REBOOT LINUX *****
/dev/hda1: 15066/62744 files (0.6% non-contiguous) , 233305/250864
blocks
fsck corrected errors on the root partition, but requested that
the system be rebooted (exit code 3).
Automatic reboot in 5 seconds.
flushing ide devices: hda
Restarting system.
------------ --------- --------- --------- --------- --------- -
again, the system restarts.
i occupy the /dev/ide/host0/ bus0/target0/ lun0/part1 because i didn't
find the /dev/hda1 on the filesystem, but it seems to reference the
same device.
i particularly bother with the message: /dev/hda1 has gone 49710 days
without being checked, check forced.
when i put the date command on my system, i get:
$date
Wed Dec 31 21:00:50 BRT 1969
too old for a ARM9 SBC! XD
i try with the TS-NVRAM (only connect to the TS7200, i don't have a
manual to do any far) and doesn't keep the current date,
also try with NTP, and neither too.
any ideas?
--- In .com, Razvan-Ionut Stoian
<razvan_ionut_ .> wrote:
>
> Hi,
>
> your entry in fstab looks different from mine.
> I mean the line containing the / partition looks like this:
> /dev/hda1
/ ext2
defaults 1 1
> where "hda1" is the CF card.
>
> R
>
> --- On Sat, 6/7/08, research_labs80 wrote:
> From: research_labs80
> Subject: [ts-7000] [7200] problem with fsck
> To: .com
> Date: Saturday, June 7, 2008, 2:49 PM
>
>
>
>
>
>
>
>
>
>
>
> i used the TS7200, with a debian dist (debian-sarge-
256MB- 05-01-2006)
>
>
>
> i mounted this on a NFS, and it's ok (after a fighting with the
>
> kernel, but that's solved now)
>
>
>
> i try to copy this on a CF Sandisk 256 MB, mounting this like:
>
>
>
> $ sudo mount /dev/...(device) /media/cfdisk
>
>
>
> in my PC i have fsck 1.40.8 (13-Mar-2008)
>
>
>
> then i copy the debian content on the flash, and unmounted it.
>
>
>
> with fconfig i define the boot on the CF:
>
> load -r -v -b 0x00218000 -m disk hda1:/boot/vmlinux. bin
>
> exec -c "console=ttyAM0, 115200 ip=dhcp root=/dev/hda1"
>
>
>
> after the initial messages, this appear on the console:
>
>
>
> ------------ --------- --------- --------- --------- --------- -
>
> Creating extra device nodes...done.
>
>
>
>
>
> Started device management daemon v1.3.25 for /dev
>
>
>
>
>
> /dev/ide/host0/ bus0/target0/ lun0: p1
>
>
>
>
>
> Checking root file system...
>
>
>
>
>
> fsck 1.37 (21-Mar-2005)
>
>
>
>
>
> e2fsck 1.37 (21-Mar-2005)
>
>
>
>
>
> /dev/ide/host0/ bus0/target0/ lun0/part1 has gone 49710 days without
>
> being checked, check forced.
>
>
>
> Pass 1: Checking inodes, blocks, and sizes
>
>
>
>
>
> Pass 2: Checking directory structure
>
>
>
>
>
> Pass 3: Checking directory connectivity
>
>
>
>
>
> Pass 3A: Optimizing directories
>
>
>
>
>
> Pass 4: Checking reference counts
>
>
>
>
>
> Pass 5: Checking group summary information
>
>
>
>
>
>
>
>
>
>
>
> /dev/ide/host0/ bus0/target0/ lun0/part1: ***** FILE SYSTEM WAS MODIFIED
>
> *****
>
>
>
> /dev/ide/host0/ bus0/target0/ lun0/part1: ***** REBOOT LINUX *****
>
>
>
>
>
> /dev/ide/host0/ bus0/target0/ lun0/part1: 15066/62744 files (0.6%
>
> non-contiguous) , 233305/250864 blocks
>
>
>
>
>
>
>
>
>
> fsck corrected errors on the root partition, but requested that
>
>
>
>
>
> the system be rebooted (exit code 3).
>
>
>
>
>
>
>
>
>
>
>
> Automatic reboot in 5 seconds.
>
> ------------ --------- --------- --------- --------- --------- -
>
>
>
> in fstab i define the fs as:
>
> /dev/ide/host0/ bus0/target0/ lun0/part1 / ext2
defaults,noatime, async 1 1
>
>
>
> i run fsck on the PC, and on the TS7200, and there is no errors, i
>
> suppose the problem is in the date, but i don't know how to fix that...
>
>
>
> anybody can help?
>