Re: [ts-7000] [7200] problem with fsck

[Razvan-Ionut Stoian <>]

Hi,

your entry in fstab looks different from mine.
I mean the line containing the / partition looks like this:
/dev/hda1       /       ext2    defaults        1 1
where "hda1" is the CF card.
 
R

--- On Sat, 6/7/08, research_labs80 <> wrote:

From: research_labs80 <>
Subject: [ts-7000] [7200] problem with fsck
To:
Date: Saturday, June 7, 2008, 2:49 PM

i used the TS7200, with a debian dist (debian-sarge- 256MB- 05-01-2006)

i mounted this on a NFS, and it's ok (after a fighting with the
kernel, but that's solved now)

i try to copy this on a CF Sandisk 256 MB, mounting this like:

$ sudo mount /dev/...(device) /media/cfdisk

in my PC i have fsck 1.40.8 (13-Mar-2008)

then i copy the debian content on the flash, and unmounted it.

with fconfig i define the boot on the CF:
load -r -v -b 0x00218000 -m disk hda1:/boot/vmlinux. bin
exec -c "console=ttyAM0, 115200 ip=dhcp root=/dev/hda1"

after the initial messages, this appear on the console:

------------ --------- --------- --------- --------- --------- -
Creating extra device nodes...done.


Started device management daemon v1.3.25 for /dev


/dev/ide/host0/ bus0/target0/ lun0: p1


Checking root file system...


fsck 1.37 (21-Mar-2005)


e2fsck 1.37 (21-Mar-2005)


/dev/ide/host0/ bus0/target0/ lun0/part1 has gone 49710 days without
being checked, check forced.

Pass 1: Checking inodes, blocks, and sizes


Pass 2: Checking directory structure


Pass 3: Checking directory connectivity


Pass 3A: Optimizing directories


Pass 4: Checking reference counts


Pass 5: Checking group summary information





/dev/ide/host0/ bus0/target0/ lun0/part1: ***** FILE SYSTEM WAS MODIFIED
*****

/dev/ide/host0/ bus0/target0/ lun0/part1: ***** REBOOT LINUX *****


/dev/ide/host0/ bus0/target0/ lun0/part1: 15066/62744 files (0.6%
non-contiguous) , 233305/250864 blocks




fsck corrected errors on the root partition, but requested that


the system be rebooted (exit code 3).





Automatic reboot in 5 seconds.
------------ --------- --------- --------- --------- --------- -

in fstab i define the fs as:
/dev/ide/host0/ bus0/target0/ lun0/part1 / ext2 defaults,noatime, async 1 1

i run fsck on the PC, and on the TS7200, and there is no errors, i
suppose the problem is in the date, but i don't know how to fix that...

anybody can help?

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___