Hi List,
On http://bat3.googlecode.com you can find a new version (0.1.3) of my
own bat3 software. It allows you to load your batteries with 1500mA
which we needed to fast load our 4200 NiMH batteries. There's one big
fat warning about the code: it doesn't control if the batteries are
loaded or not so I guess you can blow up your batteries if you don't
watch the state.
I normally start the program running `bat3 -s -1` which makes the
program keep on running. I control the battery using a raw telnet
interface on port 1302. I watch the current state with the state
command and change the target current with `current 1500`.
Any comments are welcome,
wimpunk.
--
I would love to change the world, but they wont give me the source code.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|