[ts-7000] Re: How to switch directly to sdcard Linux boot after resseting?

["ambro915" <>]

Are you booting from the recovery board TS-9441? If yes, then remove 
the jumper "Boot" on the TS-9441. If "Boot" is enabled the system 
will always load the kernel and initrd from ROM on the TS-9441.
You can clearly see if you are booting from the TS-9441, as the 
bootloader says "TS-SPIFLASHBOOT" (or similar). When booting from 
regular flash it says "TS-FLASHBOOT".

I don't know for sure what running "save" from the recovery system 
does; it probably just rewrites the system on the on-board flash with 
the one in memory. In that case it will probably enter SD root 
straight away as you boot from flash.


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/