[ts-7000] IDE/CF on TS-7800 with TS-RF2

[Frank <>]

Hi everyone,

I've got my TS-7800 and peripherals almost 100% configured.  I've got 
the Zigbee, Modem, and DIO64 (to a relay board) all working, as well as 
the hardware and software serial ports talking to a 1-Wire hub and X-10 
interface module.  I'm starting to configure MisterHouse as the "brain".

The last thing is the silly CF card on the TS-RF2 board.  I spent the 
extra $12 "just because", and I'd like to get it working before bundling 
up all the hardware into a box in the basement for the start of my home 
automation project.

So this is where the group comes in (I hope)!

The IDE driver for the CF card is the one last thing I can't get 
working.  I just don't know which step I am missing. The docs on the TS 
site appear, at least to me, to be very "2.4-ish" as I can't find any 
module resembling ide-detect in the 2.6 codebase.

I've loaded the ide-tsrf2 module and 'dmesg' shows this:

    TS-RF2 detected at I/O address 0x210, IRQ 7
    Probing IDE interface ide0...
    Technologic Systems TS-7800 IDE initialization - driver version 1.0, 
12/27/07.
and 'lsmod' shows:
    Module                  Size  Used by
    ide_tsrf2               1864  0 [permanent]
    ide_core               83620  1 ide_tsrf2

Then I 'modprobe ide-disk' and 'cat /proc/ide/drivers' to show:
    ide-disk version 1.18

However, nothing resembling "/dev/hd?" is showing up (the udevd daemon 
is running).  I'm not sure if it matters, but nothing resembling 
andentry for 'ide' shows up in /proc/interrupts.

I'm 99% sure I've got all the latest drivers.  The modules are from the 
4/15/08 set.

Any ideas?  Please let me know if I need to furnish any more information.

Thanks a bunch!

-Frank
Holland, PA







------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/