On Thu, May 1, 2008 at 2:56 PM, jonluke2008 <> wrote:
>
> Hi,
>
> Just had my TS-7260 a couple of days.
>
> Using the posts on this forum as a guide - thanks everyone! I've
> managed to configure eth0 and wlan0 (using supplied IOGEAR USB
> dongle) without too much trouble.
>
> I can access the apache webserver over ethernet by simply typing in
> the default ip address (192.168.0.50) into browser.
>
> If I then disconnect the ethernet cable and connect through wireless
> I can no longer access the webserver. I've tried 192.168.0.50 &
> 192.168.2.1 (the static IP I've given the wifi connection).
According to the config file below you are usig 255.255.255.0 mask so
192.168.0.50 and 192.168.2.1 are in different networks. How is your
network configured?
> I can successfully create a wifi connection from a windows PC & my
> ipod but can access apache from either.
Can you telnet or ping the TS?
> Any ideas on what I'm doing wrong?
>
> The wireless is configured during boot-up using the following shell
> script:
Sleeping 1 second should do (maybe less too, but busybox takes only integers)
> sh /usr/bin/loadwlan0.sh (this loads the usual modules inc zd_b.o)
> sleep 5
>
> DEVICE=wlan0
> IPADDR=192.168.2.1
> NETMASK=255.255.255.0
> NETWORK=192.168.2.0
> BROADCAST=192.168.2.255
> BOOTPROTO=static
> #BOOTPROTO=dhcp
> ENABLE=yes
>
> sleep 5
> ifconfig wlan0 192.168.2.1
> iwconfig wlan0 mode ad-hoc
> sleep 5
> iwconfig wlan0 essid "ARM9"
> ifconfig wlan0 up
>
> All suggestions greatfully received!
>
> Jon
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|