Hello,
I have downloaded the sources of the 2.4.26-ts11 kernel. It is the
kernel that comes by default with the board and it runs ok. I have
also downloaded the defconfig files. I have compiled the kernel with
the ts7300 config file and the arm-9tdmi-linux-gnu- crosscompiler,
which is supposed to be the same than the original process. No
problems until here.
But, what kernel image do I have to download to the sd-card? I have
tried vmlinx, vmlinux.bin and zImage, but none of them works. The
board reboots after showing:
>> TS-SDBOOT - built Jul 6 2006
>> Copyright (c) 2006, Technologic Systems
.
.
To download the kernel to the sd-card, I type:
$ dd if=vmlinux.bin of=/dev/sdb1 bs=65536
is this correct?
I think that the kernel should work, since it is the configuration
that embeddededarm provides. But even the precompiled kernel images
they provide in the ftp server do not work.
Any idea?
Thank you very much.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|