--- In "Michael" <> wrote:
>
> > ...that you've used in a TS-7400? I've used the same in i386 and
> > x86_64 systems and of course it works OK. Problem is on TS-7400.
> > tv_usec has the same value in start and tm.
> >
> > I wanted to ask before diving into it.
>
>
> The Cirrus kernel that our kernel is based on has a "bug" where the
> microsecond time only has a resolution equal to the clock tick (e.g. it
> increments 10,000us at a time). However if you are seeing longer
intervals
> much longer then 10ms without no us advancement then I agree with the
> previous poster who suggested a bug in user code.
>
>
> ______ Best Regards,
> |__ __/ Michael Schmidt
> || Software Engineer
> ||echnologic Systems (EmbeddedARM.com)
> || (480) 16610 East Laser Drive #10
> |/ 837-5200 Fountain Hills, AZ 85268
> http://oz.embeddedarm.com/~michael
>
Thanks for the response.
No I haven't checked what the minimum interval is. In fact I have a
signal-based scan time of 50 ms and that worked OK, which added to my
puzzle.
Now, what's the solution? What are the options?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|