--- In "pschubitzke" <> wrote:
>
> As I mentioned in a previous post, I've bricked a couple of 7260's.
>
> I've compiled SerialBlaster as per the readme. I'm able to get the box
> to boot via serial and retrieve the boot.bin and redboot.bin files.
>
> I can connect via minicom to the box, and have the Redboot prompt.
>
> My question is ... how do I load the preboot and Redboot images into
> flash? I've used some examples that I've found on this board ... but
> keep getting stuck at **Error: Invalid flag 'l'
>
> Here's where I'm at. I load the ts7260-32-kernel and write it. But get
> stuck at the next part. Can someone shed some light on this for me?
>
> RedBoot> load -v -r -b %{FREEMEMLO} -m xmodem
> CRaw file loaded 0x00053000-0x00092fff, assumed entry at 0x00053000
> xyzModem - CRC mode, 2048(SOH)/0(STX)/0(CAN) packets, 6 retries
> RedBoot> fis create RedBoot -b %{FREEMEMLO} -l 0x40000
> An image named 'RedBoot' exists - continue (y/n)? y
> RedBoot> load -v -r -b %{FREEMEMLO} -l 2048
> ** Error: invalid flag 'l'
>
No one can help me out with this?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|