[ts-7000] setting TS-CAN clock at 20 MHz

To:
Subject:	[ts-7000] setting TS-CAN clock at 20 MHz
From:	"Mariela" <>
Date:	Thu, 27 Mar 2008 22:24:47 -0000

Hi everybody, is it posible to set TS-CAN1 at 20 MHz?
In "getting started with TS-CAN1" note explains default value is 16 MHz
and it can be changed  in 1 kHz steps but it doesn´t say between which
limits.
Driver doesn´t complain but I´m not sure.




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] setting TS-CAN clock at 20 MHz, Mariela <=

Previous by Date:	Re: [ts-7000] TS7300 Kernel, David Hawkins
Next by Date:	[ts-7000] Re: IRQs, jo_xavier18
Previous by Thread:	[ts-7000] TS7300 Kernel, Chris May
Next by Thread:	[ts-7000] PWM Module by Software on TS-7400, tmoraes10
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU