--- In "mout551" <> wrote:
>
> --- In "mout551" <mout551@> wrote:
> >
> > --- In "wimpunk" <wimpunk@> wrote:
> > >
> > > --- In "mout551" <mout551@> wrote:
> > > >
> > > > i have make the things below :
> > > >
> > > > 1)untar the file tslinux-08-24.. in /var/exports/nfsroot on my
host
> > > > 2)adding in /etc/exports, the line /var/exports/nfsroot
> > > > 192.168.1.0/255..(rw,no_root_squash,insecure)
> > > > 3)i modify the file /var/exports/nfsroot/etc/fstab by adding the
> line
> > > > 192.168.1.6:/var/exports/nfsroot / nfs ext,dev,suid 1 1
> > > > 4) i write the following command :
> > > > fis load zImage-7200-ts9
> > > > exec -c "console=ttyAM0,115200 ip=192.168.1.4 root=/dev/nfs
> > > > nfsroot=192.168.1.5:/var/exports/nfsroot"
> > > >
> > > >
> > > >
> > > > and i have the following error :
> > > >
> > > >
> > > > .
> > > > .
> > > > .
> > > > Freeing init memory: 72K
> > > > INIT: version 2.85-ts1.00 booting
> > > > nfs: server 192.168.1.5 not responding, still trying
> > > > nfs: server 192.168.1.5 OK
> > > >
> > > > http://www.embeddedarm.com
> > > > email:info@
> > > >
> > > > devfsd v1.3.25 started for /dev
> > > > now mounting /proc
> > > > mounting local filesystems (in fstab)
> > > > INIT: Entering runlevel: 3
> > > > Setting hostname....
> > > > Bringing up interface eth0..
> > > > RPC: sendmsg returned error 101
> > > > nfs: RPC call returned error 101
> > > >
> > >
> > > [cut]
> > >
> > > >
> > > > If someone has an idea..
> > > > Thanks
> > > >
> > >
> > > Your init script has changed the IP adres of the server. You should
> > > set it to the correct one.
> > >
> >
> > ok thanks wimpunk, but i dont understand how to set a correct one ?
> >
>
> i have change the file /etc/network/interfaces
> I put a new static IP adress, a netmask and a gateway but i have the
> same error.
>
Even if i write my boot script with some parameters in the IP :
fis load zImage-7200-ts9
exec -c "console=ttyAM0,115200 root=/dev/nfs
nfsroot=192.168.1.5:/var/exports/nfsroot
ip=<ip_board>:<ip_server>:<gateway>:<netmask>"
I always have the same error !
Setting hostname....
Bringing up interface eth0..
RPC: sendmsg returned error 101
nfs: RPC call returned error 101
.
..
...Network is unreachable
...
thanks for your help.
BR
mout
========================================================================
Groups related to ts-7000
========================================================================
lpc2000 (98 common members)
http://groups.yahoo.com/group/lpc2000?v=1&t=ipt&ch=email&pub=groups&slk=aftr0&sec=recg
Microprocessors/Microcontrollers: The NXP (formerly Philips) LPC2000 family of
ARM M...
nslu2-general (82 common members)
http://groups.yahoo.com/group/nslu2-general?v=1&t=ipt&ch=email&pub=groups&slk=aftr1&sec=recg
Computers & Internet/Hardware: This is the general support group for the NSLU2
ma...
msp430 (64 common members)
http://groups.yahoo.com/group/msp430?v=1&t=ipt&ch=email&pub=groups&slk=aftr2&sec=recg
Computers & Internet/Hardware: Welcome to the MSP430 User's Group! The purpose
of...
motherboardmemorycpu (54 common members)
http://groups.yahoo.com/group/motherboardmemorycpu?v=1&t=ipt&ch=email&pub=groups&slk=aftr3&sec=recg
Computers & Internet/Hardware: The purpose of the group will be to share
informat...
handyboard (52 common members)
http://groups.yahoo.com/group/handyboard?v=1&t=ipt&ch=email&pub=groups&slk=aftr4&sec=recg
Computers & Internet/Hardware: The Handy Board is a 68HC11-based controller
board...
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|