--- In "Ashley" <> wrote:
>
> Thanks, It didn't even come to me that they were 5v and 3.3. Does
> anyone have some source code for writing the DIO line high for the
> transistor?
>
Hi,
it perfectly normal that it would not come to you that they are 3.3V
but the fact you don't know means you really should read the doc
before going too much further.
The doc on the TS site takes great care to point this out in bold
type where ever it explains the use of the various ports. If you dont
heed the warnings you will be buying a new board!
You probably have your answer in the other posts for code examples
but you should also note the FILES section in the forum menu. There
are lots of useful examples of exactly this sort of thing.
Sadly this feature is less than obvious to newcomers, I did not find
either until someone pointed it out.
HTH
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|