[ts-7000] cat /proc/bus/usb/devices disabling wireless ?

["ilinsdell" <>]

Has anyone experienced this and have any suggestions.

I have a process in the background which 
periodically 'cat /proc/bus/usb/devices' once every 3 seconds to look 
for newley attached USB devices.

The problem is that my wireless Airlink 101 USB interface (wlan0) 
gets disabled after 5 or 6 cat of this proc file system.

Anyone know of any solution or any other way to detect non scsi 
attached USB devices ?

dmesg is shown below:

Ian.

----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<
zd1211:USB_ST_TIMEOUT
zd1211:USB_ST_TIMEOUT
hub.c: already running port 3 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device not_pci-3 address 2
zd1211_disconnect
zd1211:USB_ST_TIMEOUT
zd1205: (enter) zd1205_close, src/zd1205.c line 4896
zd1211:USB_ST_URB_KILLED
zd1205: (exit) zd1205_close, src/zd1205.c line 4962
hub.c: Cannot enable port 3 of hub 1, disabling port.
hub.c: Maybe the USB cable is bad?



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/