Hi,
PC104 on TS-7260 is not standard one and
IRQ9 is BD08 (data bus)
IRQ4 is GND
IRQ3 is BD11
I do not have any idea about IRQ numbering on TS-7260 and how they
relate.
BR
Amir
--- In "trucmuch_59" <> wrote:
>
> hello,
> I make my own PC104 board, with 2 uart 16c550 (for GPS and a
Aerocomm)
> and an AD8504
> when I boot the system it recognize only one serial port like that:
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
enabled
> ttyS03 at 0x89c002e8 (irq = 33) is a 16550A
>
> partially good, because my board use the IRQ 7 (by the way why he
IRQ
> is write 33 for 6 and 40 for 7, where can I find the right match)
> If issue the command:
> setserial /dev/tts/3 irq 40
> everything is ok I can use my port.
>
> So my question is why it use irq 33 instead of 40 and how can I
change
> that ? (except on my board)
>
> The second uart use the port com5 and IRQ9, but doesn't show up at
> all, have no clue why, is the IRQ 9 a bad choice ?
>
> thanks for your help
>
> regards,
>
> arno
>
> PS: design of the board is free if you want to check, it's done on
eagle
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|