Hi;
I have a TS-7200. Only tried the rtc7800 command because I saw some
noise about in the forum and - hey - it wouldn't be the first time an
application written for one piece of hardware worked on another. But it
didn't. It does in fact exist on my system, though.
The documentation on the TS-5600 daughter board is, shall we say, pretty
thin.
--Jeff
Michael wrote:
>
>
>
> > Hi;
> >
> > I just added the TS-5620 daughterboard to a TS-7200 and have been
> > unable to figure out how to use it. /dev/rtc shows up, but hwclock
> > says it can't open it . There appears to be a utility rtc7800 but
> > it doesn't
>
> Do you have a TS-7200 or a TS-7800? The "rtc7800" is only for the
> TS-7800 so should not exist on a TS-7200. This utility only works for
> the on-board RTC; we currently have not investigated implementing
> support for the TS-5620 on the TS-7800 as an RTC option is available
> for the TS-7800.
>
> > recognise this hardware configuration either. I did an exhaustive
> > search of this forum and another on the TS website and can find
> > nothing on it.
> >
> > How does one go about setting and utilizing this RTC?
> >
> > Thanks.
> >
> > --jeff
>
> ______ Best Regards, |__ __/ Michael Schmidt || Software Engineer
> ||echnologic Systems (EmbeddedARM.com) || (480) 16610 East Laser
> Drive #10 |/ 837-5200 Fountain Hills, AZ 85268
> http://oz.embeddedarm.com/~michael
> <http://oz.embeddedarm.com/~michael>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|