On Tue, January 15, 2008 1:18 pm, Amir Ahmadi wrote:
> Hi everyone,
>
> I read messages about reflashing TS-7800.
> My case is I have a TS-7800 with modified boot to boot up from flash,
> but I do not have the flash!!!
It is unclear to me what you mean by this. The TS-7800 will boot from the
onboard flash if there is no SD card, or if JP1 is off. What
modifications are you referring to? Did you de-solder the flash from the
board?
> Is there any way to put back the board in factory stting boot.
> I have an extra TS-7260 which is not modified and booting from internal
> flash.
If you are talking about a TS-7260 which has been modified to boot from
the SD card, this is not easy to reverse to make the board boot from the
on-board flash again. You basically have to re-blast the board.
> Many thanks,
>
> Amir
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|