Peter Santangeli wrote:
> I've found the sample code on the ftp site, but I need to modify it
> fairly extensively (I need to run the A/D's at pretty close to maximum
> rate), and I could use some background on what the code is doing.
I am working with a TS-7250 board. I modified the sample A/D routines. I moved
the reading of the EEPROM calibration data out of the reading loop as it only
needs to be done once. I also optimized the routines so they spend the least
amount of time reading the A/D's. I plan to upload the file to the Yahoo Group
file area but I wanted to add some comments to the source before I do that.
You can find a copy of the file (without the extra comments) at:
http://www.ve3syb.ca/tmp/adc_7250.c
--
Cheers!
Kevin.
http://www.ve3syb.ca/ |"What are we going to do today, Borg?"
Owner of Elecraft K2 #2172 |"Same thing we always do, Pinkutus:
| Try to assimilate the world!"
#include <disclaimer/favourite> | -Pinkutus & the Borg
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|