--- In "afg_herwijn" <> wrote:
>
> I will be using a TS-7260 with RS485 and SD socket as a datalogger for
> an array of sensors in an avalanche start zone. The sensors will have
> a digitzing board right next to them which will send the data via
> RS485. Since I am new to both Linux and C (let alone serial port
> programming), I don't know how to acquire the data from the sensors.
> At first I just want to talk to one sensor before expanding the array
> to 7 sensors. I know this should be fairly straightforward, so if
> anyone can help me, or point me in the right direction, I would
> greatly appreciate it.
>
> Alec
>
Alec,
I'm currently working with TS-7250 and its RS-485 serial port.
My program has been written in C, so I can give you sample snippet or
suggestions to handle your application.
If you give some more information about the protocol used by the
acquisition board, I'll try to be more detailed
Marco
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|