[ts-7000] RS-485 on TS-7260

["afg_herwijn" <>]

I will be using a TS-7260 with RS485 and SD socket as a datalogger for
an array of sensors in an avalanche start zone. The sensors will have
a digitzing board right next to them which will send the data via
RS485. Since I am new to both Linux and C (let alone serial port
programming), I don't know how to acquire the data from the sensors.
At first I just want to talk to one sensor before expanding the array
to 7 sensors. I know this should be fairly straightforward, so if
anyone can help me, or point me in the right direction, I would
greatly appreciate it.

Alec
  




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/