or better yet what is the procedure t/s use to perform the flashing?
--- In "JD" <> wrote:
>
> Is there an idiots guide to flash restoration on the 7800 using a
> bootable SD card.
>
> I can boot using the SD card to the quick linux prompt.
>
> Restore the linux file system:
> run 'sdmount' to mount the root file system from the sd card.
> run 'createmtdroot' which will format /dev/mtdblock4 and copy the root
> files to it.
>
> Restore kernel partition:
> run 'dd if=/dev/tssdcardb2 of=/dev/mtdblock1'
>
> Restore ram disk partition:
>
> run 'dd if=/dev/tssdcardb3 of=/dev/mtdblock2'
>
> And we are done, or are we?
> If I repower without the SD card, it stops at the "Booting from
> onboard NAND flash..." message.
>
> I am probally missing something obvious.
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|