Charlie Wallace napsal(a):
> so since i didn't get any recommendations i went to frys and bought what they
> had.
>
> The two ISS devices i got appeared in lsusb, but a hcitool scan failed
> (macsense and inland) seem to
> be same internally.
> The CSR device ( A syba 1.1 ) worked on all the tests i did so far.
> The Broadcom chipset Zoom i had also failed both on scan and on a reboot
> couldn't be seen again,
> that one might need the specific broadcam driver and patches.
>
> I tested them by rebooting, unplugging and replugging and the CSR was the
> only one that passed the
> test, running a scan etc, i have not done a pair yet, but the device i want
> to pair hasn't arrived
> yet, but at least it sees my two phones, and a mac laptop.
>
> The syba is a fairly generic CSR chipset thats available on a lot of dongles,
> i think it being 1.1
> probably helped.
>
> :charlie# lsusb
> Bus 001 Device 001: ID 0000:0000
> Bus 001 Device 005: ID 1131:1001 Integrated System Solution Corp.
> :charlie# hcitool scan
> Scanning ...
> Inquiry failed: Connection timed out
> :charlie# hciconfig
> hci0: Type: USB
> BD Address: 00:11:67:5C:3E:D1 ACL MTU: 678:8 SCO MTU: 48:10
> UP RUNNING PSCAN ISCAN INQUIRY
> RX bytes:99 acl:0 sco:0 events:13 errors:0
> TX bytes:304 acl:0 sco:0 commands:13 errors:0
>
> :charlie# hciconfig hci0 up
> :charlie# hcitool scan
> Scanning ...
> Inquiry failed: Connection timed out
> :charlie# !ls
> lsusb
> Bus 001 Device 001: ID 0000:0000
> Bus 001 Device 006: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth
> Dongle (HCI mode)
> :charlie# hcitool scan
> Scanning ...
> 00:19:79:2F:F0:32 Nokia N75
> 00:17:84:6D:C7:2D WM_Charlie_Wal1
> 00:0D:93:0D:65:E2 charlie wallace?ÇÖs Computer
> :charlie#
Hi,
you are in same situation that me. Only one solution switch to 2.6.x
this it kernel bug I mean. Bluetooth with 2 adapters connected to TS
doesn't work.
Dan
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|