[ts-7000] Running program at boot

["whiffwaffle" <>]

What is the proper way to automatically run my user program at boot 
on a 7400?

I've been messing with the /etc/rcX.d files but I can't seem to get 
the sequence I want, which is:

1) Go through the normal boot procedure.
2) Automatically log on as user xyz.
3) Run my program and display messages it prints on the console.
4) If I press ctrl-c, abort program and be at command line prompt.

Or alternately:

1) Go through the normal boot procedure.
2) Run my program and display messages it prints on the console.
3) If I press ctrl-c, abort program and be at a login prompt.

Any suggestions?




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/