--- In "Gonzalo A. de la Vega"
<> wrote:
>
> On Dec 11, 2007 8:39 AM, Anssi Kolehmainen <> wrote:
> >
> > On Tue, Dec 11, 2007 at 08:40:34AM -0000, ahmed.business wrote:
> > > I have a TS 7260 BOARD
> > >
> > > and it boots to the TS-Linux successfully. but when i insert a USB
> > > storage the the BOARD system reboots and goes into an infinite
cycle
> > > of rebooting.... so is it a Hardware settings cause it is not
> > > related to the Linux installed on the board
> >
> > Does your power supply provide enough power? My first try with
TS-7200
> > resulted in infinite boot loop because power supply wasn't good
enough.
> > With another power supply things started working fine.
>
> Yep... but 2W should be enough unless the storage device is very power
> hungry. How much power can your power source supply?
>
> Gonzalo
>
The Device was a USB MAss Storage 120 GB and for sure it is power
hungry. when i used another one it worked.
So still need much power to drive a 4 Port USB HUB with Class A
Bluetooth Dongles ? Do you know how much power i should drive in ?
they Bluetooth power up up but is not operating fine.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|