ts-7000
[Top] [All Lists]

[ts-7000] Re: A USB insert Problem

To:
Subject: [ts-7000] Re: A USB insert Problem
From: "ahmed.business" <>
Date: Wed, 12 Dec 2007 19:48:24 -0000
--- In  Anssi Kolehmainen <> wrote:
>
> On Tue, Dec 11, 2007 at 08:40:34AM -0000, ahmed.business wrote:
> > I have a TS 7260 BOARD
> > 
> > and it boots to the TS-Linux successfully. but when i insert a USB
> > storage the the BOARD system reboots and goes into an infinite cycle
> > of rebooting.... so is it a Hardware settings cause it is not
> > related to the Linux installed on the board
> 
> Does your power supply provide enough power? My first try with TS-7200
> resulted in infinite boot loop because power supply wasn't good enough.
> With another power supply things started working fine.
> 
> -- 
> Anssi Kolehmainen
> 
> 040-5085390
>



Yes it is the Power ....

So still need much power to drive a 4 Port USB HUB with Class A
Bluetooth Dongles ? Do you know how much power i should drive in ?



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU