Michael Schmidt napsal(a):
> On Fri, December 7, 2007 1:57 pm, Daniel Smolik wrote:
>> Hi,
>> I have now working CF 2.6.23-rc1 with modified IDE driver. I must
>> clean code and after this I post a patch. Now I have only last thing
>> to get TS-7200 full running under 2.6 and it is FLASH. I start looking
>> to port a driver from 2.4.x but I have question is possible get NOR
>> flash working only with kernel comandline parameter mtdparts=....
>> Can anybody give me his mtdparts line if exists ?
>
> Hi Dan,
>
> What did you have to patch in order to make IDE work? I've been trying to
> get IDE working on 2.6.22 (for the TS-7800) and haven't had any luck -
> everything compiles fine (after some work) but when I load the modules
> they do not recognize any CF devices. (Also, they complain that the
> parameters I pass are obsolete, which is troubling, because that suggests
> in the future the drivers might not even work with IDE ports at
> non-standard addresses...)
>
> Also, I've noticed that the documentation for IDE seems to be out of date
> in 2.6, both in Documentation/ide.txt, and in make menuconfig. The former
> appears to be untouched since 2.4, still referring to loading ".o" modules
> instead of ".ko", while the latter suggests in some cases that modules
> will be built that aren't. (e.g. ide.o)
>
> If you could post your patches that would be great; even though you have a
> slightly newer kernel version perhaps they would be applicable or at least
> suggest what I am missing.
>
Hi Michael,
one my customer need working TS-7200 on 2.6.x because on 2.4.26-tsX
kernel bluetooth didn't work with 2 BT adapters. I have working
2.6.23-rc1 on TS-7250 and I start port this kernel to TS-7200. I have
found Alessandro Zummo patch that add support for CF on TS-7200 to new
libata. I spend one day and didn't get it work. I must solve this
problem and I start searching for another solution. I add ide-tscf
driver to old IDE. I am not kernel programmer but after 2 days I get
this work. Please be patient I must separate patch from my source tree
and after this I send it to the list.
Regards
Dan Smolik
--
Mydatex s r.o.
http://www.mydatex.cz
email:
mob: 604200362
tel: 226210085
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|