On Fri, December 7, 2007 1:57 pm, Daniel Smolik wrote:
> Hi,
> I have now working CF 2.6.23-rc1 with modified IDE driver. I must
> clean code and after this I post a patch. Now I have only last thing
> to get TS-7200 full running under 2.6 and it is FLASH. I start looking
> to port a driver from 2.4.x but I have question is possible get NOR
> flash working only with kernel comandline parameter mtdparts=....
> Can anybody give me his mtdparts line if exists ?
Hi Dan,
What did you have to patch in order to make IDE work? I've been trying to
get IDE working on 2.6.22 (for the TS-7800) and haven't had any luck -
everything compiles fine (after some work) but when I load the modules
they do not recognize any CF devices. (Also, they complain that the
parameters I pass are obsolete, which is troubling, because that suggests
in the future the drivers might not even work with IDE ports at
non-standard addresses...)
Also, I've noticed that the documentation for IDE seems to be out of date
in 2.6, both in Documentation/ide.txt, and in make menuconfig. The former
appears to be untouched since 2.4, still referring to loading ".o" modules
instead of ".ko", while the latter suggests in some cases that modules
will be built that aren't. (e.g. ide.o)
If you could post your patches that would be great; even though you have a
slightly newer kernel version perhaps they would be applicable or at least
suggest what I am missing.
> Regards
> Dan
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|