ts-7000
[Top] [All Lists]

[ts-7000] Redboot and kernel 2.6.21-ts

To: TS-7200 Mailing List <>
Subject: [ts-7000] Redboot and kernel 2.6.21-ts
From: Marco Pracucci <>
Date: Fri, 23 Nov 2007 17:24:13 +0100
Hi,

I have seen that Technologic System has officially released the kernel
2.6.21-ts and I have tried it on a TS-7250. I have a problem: now,
redboot does not boot anymore and I'm not able to get redboot prompt.
Moreover, I have tried to recover it with serial blaster, but I get a
strange error.

1) How I have compiled the kernel

Downloaded the kernel from:
ftp://ftp.embeddedarm.com/ts-arm-linux-cd/sources/tskernel-2.6.21-ts-src.tar.gz
Downloaded the crosstool chain from:
ftp://ftp.embeddedarm.com/ts-arm-linux-cd/cross-toolchains/crosstool-linux26-3.4.4-2005q3-2.tar.gz
Edited Makefile
make ts72xx_defconfig
make

2) How I have run the new kernel image, from the Redboot console (please
note that I use JFFS2)

RedBoot> load -v -r -b 0x00218000 -m http -h 192.168.0.5
/zImage-linux-2.6.21-ts
-
Raw file loaded 0x00218000-0x0038369f, assumed entry at 0x00218000
RedBoot> exec -c "console=ttyAM0,115200 root=/dev/mtdblock1
mtdparts=phys_mapped_flash:16k(TS-BOOTROM)ro,29696k(Linux),-(RedBoot)
rootfstype=jffs2 panic=5 debug"

3) The kernel load successfully and the system works fine

4) Reboot

/ $ reboot
Restarting system.

5) The unit does not boot anymore and it's not possibile to enter the
redboot console. The serial console shows the following messages:

>> TS-NANDBOOT, Rev 1.00 - built 10:14:31, Mar  7 2005
>> Copyright (C) 2004, Technologic Systems


>> TS-BOOTROM, Rev 1.08 - built 16:18:21, Jun  5 2006
>> Copyright (C) 2006, Technologic Systems
>> TS-7250: Rev >E1 CPU, Rev B PLD, 32MB SDRAM
>> TS-5620: detected, battery OK, time ( 15:51:44, Nov 23 2007 )

(here it blocks)

===========================

I have tried the same procedure on another TS-7250 and I get the same
behavior.

===========================

I have tried to recover the TS-7250 with serial blaster (in the past,
I've been able to do it), but I get the following error:
>> OPEN TS-7250 BOOTLOADER, Rev 1.00 <<
SDRAM:32MB, FLASH:8MB, BOOT:Serial, BLD:"Oct 11 2006"


length=259744
waiting length acknowledgement 
found 
--------- SENDING FILE "redboot.bin" ---------
....write(): Resource temporarily unavailable
WriteByte ERROR,



Do you have any idea or suggestion?

Thanks,
Marco Pracucci




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU