| To: | |
|---|---|
| Subject: | Re: [ts-7000] TS-GSM1 and TS-RF2-ZIGBEE devices for TS-7800 |
| From: | "Michael Schmidt" <> |
| Date: | Wed, 14 Nov 2007 10:05:48 -0700 (MST) |
On Tue, November 13, 2007 4:36 pm, wizwally wrote:
> Hi,
> I bought a TS-7800 with TS-GSM1 (GR64 module) and TS-RF2-ZIGBEE boards.
> Which modules have to be loaded to access the two boards?
> Are the drivers still in development?
Yes. Although the TS-GSM1 may work under 2.6 without a modified driver,
we haven't tested this yet, and anticipate there may be a few tweaks
needed before it will work. The TS-RF2-ZIGBEE board needs a modified
version of the tsuart-rf2.c module ported to 2.6, which is in the
pipeline.
>
> thanks
> G. Saderis
Best Regards,
_________
Michael / _____/chmidt michael _A_T_ embeddedArm _D_O_T_ com
\_____ \ 16610 East Laser Drive #10
/ \ Fountain Hills, AZ 85268
Technologic /_______ /ystems (480) 837-5200 / fax (480) 837-7300
\/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: CF Drive not ready Ts-7200, charliem_1216 |
|---|---|
| Next by Date: | [ts-7000] Re: CF Drive not ready Ts-7200, Fabio Vaz |
| Previous by Thread: | [ts-7000] TS-GSM1 and TS-RF2-ZIGBEE devices for TS-7800, wizwally |
| Next by Thread: | [ts-7000] Re: CF Drive not ready Ts-7200, Fabio Vaz |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU