Would someone look through the following bootup sequence and tell me
how to fix my problem? I'm unable to run lrz, lsz, portmap, devfsd and
several other commands on my TS-7250. I can no longer use my USB
ports. BTW: This occurred after a failed attempt at loading NetBSD on
my SBC.
TIA
... Resetting.
>> TS-NANDBOOT, Rev 1.01 - built 10:30:52, Dec 20 2005
>> Copyright (C) 2005, Technologic Systems
>> TS-BOOTROM, Rev 1.08 - built 10:40:29, Jun 12 2006
>> Copyright (C) 2006, Technologic Systems
>> TS-7250: Rev >E1 CPU, Rev B PLD, 64MB SDRAM, options ( RS485 )
>> TS-5620: detected, battery OK, time ( 00:14:29, Dec 14 2007 )
Found FIS directory at 07f80000
+page marked bad
flash_read_buf error=8
flash_hwr_map_error=8
err_addr = 0x67fe0000
page marked bad
flash_read_buf error=8
flash_hwr_map_error=8
err_addr = 0x67fc0000
page marked bad
flash_read_buf error=8
flash_hwr_map_error=8
err_addr = 0x67fa0000
Ethernet eth0: MAC address 00:d0:69:40:9b:c6
IP: 192.168.1.50/255.255.255.0, Gateway: 192.168.1.1
Default server: 192.168.1.103
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version current-TS_5 - built 16:49:53, Mar 26 2007
Platform: TS-7250 Board (ARM920T) Rev A
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
RAM: 0x00000000-0x02000000, [0x000530c0-0x01fdd000] available
FLASH: 0x60000000 - 0x68000000, 1024 blocks of 0x00020000 bytes each.
== Executing boot script in 1.000 seconds - enter ^C to abort
RedBoot> fis load vmlinux
RedBoot> exec -c "console=ttyAM0,115200 root=/dev/mtdblock1"
Using base address 0x00218000 and length 0x000c0000
Linux version 2.4.26-ts11 (gcc version 3.3.4) #3 Tue
Jun 6 14:13:14 MST 2006
CPU: Arm920Tid(wb) revision 0
Machine: ep9301
On node 0 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 1 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 4 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 5 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 16 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 17 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 18 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 19 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyAM0,115200 root=/dev/mtdblock1
Console: colour dummy device 80x30
Calibrating delay loop... 99.94 BogoMIPS
Memory: 8MB 8MB 8MB 8MB 8MB 8MB 8MB 8MB = 64MB total
Memory: 61000KB available (1216K code, 344K data, 76K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
CPU: Testing write buffer: pass
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch
devfs: boot_options: 0x1
ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA
ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA
ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ enabled
Real Time Clock Driver v1.10f
ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
Searching for NAND flash...
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB
3,3V 8-bit)
Using static partition definition
Creating 3 MTD partitions on "NAND 128MiB 3,3V 8-bit":
0x00000000-0x00020000 : "TS-BOOTROM"
0x00020000-0x07d20000 : "Linux"
0x07d20000-0x08000000 : "RedBoot"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Mounted root (yaffs2 filesystem).
Mounted devfs on /dev
Freeing init memory: 76K
INIT: version 2.85-ts1.01 booting
http://www.###########.com
email:
----------------------------------------------------------
EVERYTHING SEEMS TO WORK GREAT UP TO THIS POINT!!!
----------------------------------------------------------
devfsd v1.3.25 started for /dev
now mounting /proc
/bin/mount: error while loading shared libraries: /lib/libblkid.so.1:
invalid ELF header
mounting local filesystems (in fstab)
insmod: usbcore.o: no module by that name found
Using /lib/modules/2.4.26-ts11/kernel/arch/arm/common/pcipool.o
insmod: usb-ohci.o: no module by that name found
insmod: usb-ohci-ep93xx.o: no module by that name found
insmod: printer.o: no module by that name found
Using /lib/modules/2.4.26-ts11/kernel/drivers/scsi/scsi_mod.o
SCSI subsystem driver Revision: 1.00
Using /lib/modules/2.4.26-ts11/kernel/drivers/scsi/sd_mod.o
insmod: usb-storage.o: no module by that name found
mount: Mounting /dev/scsi/host0/bus0/target0/lun0/part3 on /mnt/cf_usb
failed: No such file or directory
setting system clock
Fri Dec 14 00:15:03 UTC 2007
INIT: Entering runlevel: 3
Setting hostname....
Bringing up interface eth0..
Bringing up interface lo..
setting kernel IP routing tables
Starting portmap...
/sbin/portmap: error while loading shared libraries: libnsl.so.1:
cannot open shared object file: No such file or diry
Starting INETD...
Starting telnetd...
Starting apache.../www/apache/bin/apachectl start: httpd started
Technologic Systems TS-LINUX/arm 7.0
HCIController login: root
login[87]: root login on `ttyAM0'
BusyBox v1.00-rc2 (2004.08.05-21:44+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
Wayne Conduff
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|