ts-7000
[Top] [All Lists]

[ts-7000] Re: DHCP Problems

To:
Subject: [ts-7000] Re: DHCP Problems
From: "arkalonian" <>
Date: Fri, 09 Nov 2007 20:18:20 -0000
Hmmm.  Does eth0 not appear to be present at all when your MAC is
connected?

-Angelo

--- In  Ilya Goldberg <> wrote:
>
> 
> On Nov 9, 2007, at 1:41 PM, arkalonian wrote:
> 
> > No one has run into this recently?
> 
> I have with my 7260 board.  It works fine acquiring its network  
> configuration with DHCP while cabled into my wireless router (Buffalo  
> running DD-WRT), but it wouldn't work cabled to my mac running the  
> bootps that comes with OS X 10.4.10 client.  I could see the requests  
> in the mac's /var/log/system.log, but there is no response - as if  
> the request wasn't formatted correctly.  I share my internet  
> connection regularly with this mac, so I know that this works for  
> other computers.  I haven't investigated further since it works fine  
> with my router, but it is kind of a pain making it harder to take on  
> the road for "demos".
> 
> -Ilya
> 
> 
> 
> 
> 
> >
> > --- In  "arkalonian" <angelo@> wrote:
> >>
> >> I'm currently trying to get a TS-7400 to accept DHCP, but I'm having
> >> no luck. (Static IP setup works fine)
> >>
> >> My /etc/network/interfaces:
> >>
> >> auto lo
> >> iface lo inet loopback
> >>
> >> auto eth0
> >> iface eth0 inet dhcp
> >> #iface eth0 inet static
> >> #        address 192.168.0.104
> >> #        netmask 255.255.255.0
> >> #        gateway 192.168.0.1
> >>
> >> "uname -a" gives this:
> >> Linux istanbul 2.4.26-ts11 #1 Thu Dec 7 16:16:12 MST 2006 armv4l
> > GNU/Linux
> >>
> >> I also found the post about the af_packet.o, copied over the module,
> >> made sure it had the same read/write permissions as the other modules
> >> in /lib/modules/2.4.6-ts11/kernel , but that didn't make a  
> >> difference.
> >>
> >> I get an "Operation failed" when I try "pump -i eth0"
> >>
> >> and only the loopback interface is up.
> >>
> >> Any ideas?
> >>
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU