On Nov 9, 2007, at 1:41 PM, arkalonian wrote:
> No one has run into this recently?
I have with my 7260 board. It works fine acquiring its network
configuration with DHCP while cabled into my wireless router (Buffalo
running DD-WRT), but it wouldn't work cabled to my mac running the
bootps that comes with OS X 10.4.10 client. I could see the requests
in the mac's /var/log/system.log, but there is no response - as if
the request wasn't formatted correctly. I share my internet
connection regularly with this mac, so I know that this works for
other computers. I haven't investigated further since it works fine
with my router, but it is kind of a pain making it harder to take on
the road for "demos".
-Ilya
>
> --- In "arkalonian" <> wrote:
>>
>> I'm currently trying to get a TS-7400 to accept DHCP, but I'm having
>> no luck. (Static IP setup works fine)
>>
>> My /etc/network/interfaces:
>>
>> auto lo
>> iface lo inet loopback
>>
>> auto eth0
>> iface eth0 inet dhcp
>> #iface eth0 inet static
>> # address 192.168.0.104
>> # netmask 255.255.255.0
>> # gateway 192.168.0.1
>>
>> "uname -a" gives this:
>> Linux istanbul 2.4.26-ts11 #1 Thu Dec 7 16:16:12 MST 2006 armv4l
> GNU/Linux
>>
>> I also found the post about the af_packet.o, copied over the module,
>> made sure it had the same read/write permissions as the other modules
>> in /lib/modules/2.4.6-ts11/kernel , but that didn't make a
>> difference.
>>
>> I get an "Operation failed" when I try "pump -i eth0"
>>
>> and only the loopback interface is up.
>>
>> Any ideas?
>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|