Re: [ts-7000] Re: ftp failure

["Kevin Kreger" <>]

Martin,

Thanks for your reply. I was using the proper flags and passive
was not an issue. I rebuilt the latest version of busybox which
had quite a few ftpput/ftpget problems that have been fixed in
the past few months.

I'd have to say this problem is cleanly solved with the latest
version of busybox: 1.7.2

Thanks for your time and thoughts!

Cheers,

Kevin

On 10/29/07, naturalwatt <> wrote:

There are a couple if things that spring to mind.

Firstly, if a username and password is involved, you are using the -u username -p password
option to ftpget/put, aren't you?

Secondly, ftpput is hardcoded to use Passive mode which works well when going out through
firewalls. I needed to use normal (non-passive mode) and ended up using wget with an ftp:
scheme URI. But the symptoms of this mode is not failure but indefinite hang.

Hope this helps

Martin

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___