pgb_psu wrote:
> I've downloaded the tskernel source from
> ftp://ftp.embeddedarm.com/ts-arm-linux-cd/sources/tskernel-2.4.26-ts11-src.tar.gz
>
> <ftp://ftp.embeddedarm.com/ts-arm-linux-cd/sources/tskernel-2.4.26-ts11-src.tar.gz>
>
> and the crosstool chain (crosstool-linux-gcc-4.0.1-glibc-2.3.5.tar.bz2)
Using gcc 4.0.1 is fine when building your applications. If you want to build
kernel modules and/or the 2.4.26-ts11 kernel you need to use the gcc version
3.3.4 crosstool chain.
--
Cheers!
Kevin.
http://www.ve3syb.ca/ |"What are we going to do today, Borg?"
Owner of Elecraft K2 #2172 |"Same thing we always do, Pinkutus:
| Try to assimilate the world!"
#include <disclaimer/favourite> | -Pinkutus & the Borg
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|