Thanks Dave. I'll give that a try. Why on earth would TS provide a crosstool
chain that
didn't work with their kernels?
p
--- In David Hawkins <> wrote:
>
> Hi,
>
> > when I try to run it on the TS board, I got an error telling me
> > I need to compile the module for the kernel I want to run
> > it on. To do that, I need to install and compile the TS-11 kernel
> > on my host machine.
>
> Try my notes:
>
> http://www.ovro.caltech.edu/~dwh/ts7300/
>
> > and the crosstool chain (crosstool-linux-gcc-4.0.1-glibc-2.3.5.tar.bz2)
>
> This is probably not the correct tool chain for the kernel
> you are running. The notes above tell you how to build
> everything from source. Don't worry if you're not using
> a TS-7300, the kernel and tools setup is the same for
> the other TS boards that run a 2.4 kernel.
>
> Cheers,
> Dave
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|