--- In "serdar_akkan" <> wrote:
>
> hi,
>
> my power supply is not a problem. Because i have three 7300 boards and
> one of them is working fine but 2 of them have the same problem. i use
> one power supply. i also try with 5.5 V but they did same thing.
>
> i will control the sd cards but i dont think sd cards have a problem.
> because we bought them with boards.
>
> thanks for your help
>
i also controlled the SD card. it is in primary slot and i checked
there is linux operating system files. there are two partition on sd
card.
i tried with low voltage level 4,5-5 V and the board did the same thing
two leds blink and red led turns off after a while again two leds blink
an red led turns off but it is faster. i check the console and the
start message appears for each of restart. console output is like that
>> TS-SDBOOT - build Jul 6 2006
>> Copyright .........
>> TS-SDBOOT - build Jul 6 2006
>> Copyright .........
>> TS-SDBOOT - build Jul 6 2006
>> Copyright .........
>> TS-SDBOOT - build Jul 6 2006
>> Copyright .........
what do u think about that problem? i think it is about software
thanks for ur help
Serdar.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|