--- In Jim Jackson <> wrote:
>
>
>
>
> On Thu, 11 Oct 2007, j.chitte wrote:
>
> > the voltages present were : 1.29, 0.0, 0.71 in the same order.
> >
> > I rebuilt using 5V and UNIPOLAR then rmmod and insmod but then all
> > but channel-1 gave zero.
> >
> > since it all went so cleanly I suspect I may have misunderstood
how
> > it is suppossed to work.
> >
>
> First can you confirm that _without_ the ADC module loaded, you can
get
> sensible values by using some sort of command line code to read the
MAX197
> ADC chip?
>
> Jim
>
Hi Jim,
yes I was already getting expected values from adc_logger before and
after looking at /dev/adc?
/js
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|