Has anyone successfully booted the 7200 off the CF card?
>From the configuration, it appears that CF cards are only supported as
PCMCIA cards. From what I understand, that's OK, so I have all of
that set up and built into the kernel. But I keep getting:
RedBoot> load -r -b 0x00218000 -m disk hda1:/boot/zImage
Raw file loaded 0x00218000-0x0038c76f, assumed entry at 0x00218000
RedBoot> exec -c "root=/dev/hda1 console=ttyAM0,115200"
Using base address 0x00218000 and length 0x00174770
Uncompressing Linux..
......
VFS: Cannot open root device "hda1" or unknown-block(2,0)
Please append a correct "root=" boot option; here are the available
partitions:
1f00 6272 mtdblock0 (driver?)
1f01 256 mtdblock1 (driver?)
1f02 1408 mtdblock2 (driver?)
1f03 4 mtdblock3 (driver?)
1f04 128 mtdblock4 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(2,0)
Are CF cards in 2.6 SCSI devices, like SD cards?
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|