Hi Kharis,
I did the same. Removed stack boundary options.
Seems like arm-gcc doesn't recognize this flag.
I am using vgrabbj to capture images. Works fine.
Bibhu
--- In k_yohendi <> wrote:
>
> Hi all,
>
> I successfully compiled spca5xx.o
> i use gcc 3.3.5, compile was successful after I remove
> -mpreferred-stack-boundary=2
> in compiler flags at Makefile, because this line generates error
messages.
>
> but when I use it with Logitech Communicate STX and camserv to grab
> images, I get
> (V4L) Video IOCTL: Invalid argument.
>
> hope this helps.
>
> --
> Kharis
>
>
> bibhu wrote:
> > I am not able to compile spcaxxx either. Can't find any
references..
> > I have the quickcam.o ready for Linux 2.4.26-ts11. There were few
> > errors here and there but its manageable.
> > Mail me at and I will give you quickcam.o
> >
> > Bibhu
> >
> > --- In "newpants2004" <newpants2004@>
> > wrote:
> >
> >> i did follow the link. success compiled video for linux module.
> >>
> >> but dont know how to cross compile the driver module (ov511,
spca5xx
> >> or quickcam)
> >>
> >> try to find a howto for cross compile, no luck.
> >>
> >> could you tell me how you did?
> >> and could you email me your pre-complied module and spcaserv?
> >>
> >> thanks a lot!
> >>
> >>
> >>
> >>
> >>
> >> --- In "bibhu" <bibhu_420@> wrote:
> >>
> >>
> >>> Follow this link. You will get your videodev.o
> >>> http://vexrobot.blogspot.com/2006/11/cross-compiling-quickcam-
web-
> >>> cam.html
> >>>
> >>> --- In "newpants2004" <newpants2004@>
> >>> wrote:
> >>>
> >>>> could you tell me more detail about how you did?
> >>>>
> >>>> i have no luck to compile the v4l.
> >>>>
> >>>> thanks
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> --- In "ilinsdell" <IanLinsdell@>
> >>>>
> > wrote:
> >
> >>>>> I've used an Omnivision USB camera with the 7400 board.
> >>>>>
> >>>>> I compiled the ov511 driver and videodev video for linux as a
> >>>>>
> >>>> loadable
> >>>>
> >>>>> modules from the ts11 kernel.
> >>>>>
> >>>>> Also compiled spcaserv to stream the video data over the inet
> >>>>>
> > to
> >
> >>>> the
> >>>>
> >>>>> spaserv Java applet.
> >>>>>
> >>>>> Worked great !
> >>>>>
> >>>>> --- In "Laks" <laks@> wrote:
> >>>>>
> >>>>>> Hi to every body,
> >>>>>> Does any connected a Camera through the USB port of the
> >>>>>>
> > TS7250?
> >
> >>>>>> I will appreciate any help in this regard
> >>>>>> -laks
> >>>>>>
> >>>>>>
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|