the pwc.o should work. easy to compile from the kernel source.
but i have green and compressed jpeg file captured by using streamer.
my webcam is quickcam pro3000
--- In "bibhu" <> wrote:
>
> I am using the Logitech QuickCam chat 0x046d-0x092c.
> I have inserted videodev.o, quickcam.o and created a device node.
> When I am trying to capture an image using vgrabbj application, I am
> getting the following error:
>
> Can't open "/dev/video0" as VideoDevice!
> Fatal Error (non-daemon), exiting...
> There was no map allocated to be freed...
> Device /dev/video0 was already closed...
>
> Any ideas ?
>
> Thanks,
>
> Bibhu
>
>
> --- In "bibhu" <bibhu_420@> wrote:
> >
> > Can you please mail me your videodev.o ?
> > I don't think there should be any compatibility issue. I use the
> > linux that was shipped with my TS-7300.
> >
> > --- In "bibhu" <bibhu_420@> wrote:
> > >
> > > Thanks for the quick response Kharis!!
> > > I'll get back to you if I need anything.
> > > --- In k_yohendi <k_yohendi@> wrote:
> > > >
> > > > hi Bibhu,
> > > >
> > > > from what I have learned these 2 months, (I'm new to embedded
> > linux)
> > > > there're 3 driver available for webcam,
> > > > 1. quickcam usb (http://qce-ga.sourceforge.net/);
> > > > I successfully use this one, but it's obsolete
> > > > 2. spca5xx (http://mxhaard.free.fr/spca5xx.html)
> > > > I haven't succeed to use it on TS board
> > > > 3. pwc (http://www.saillard.org/linux/pwc/)
> > > > I didn't try this one
> > > >
> > > > on each site there's list on which webcam available...
> > > > to grab the frame image, I use camserv.
> > > >
> > > > you also will need video4linux installed on your system,
> > > > I got it on my system by using driver module (videodev.o)
> > > > after following instructions on this site,
> > > > vexrobot.blogspot.com/2006/11/cross-compiling-quickcam-web-
> > cam.html
> > > >
> > > >
> > > > Please anyone tell me if I missed something...
> > > >
> > > > -Kharis
> > > >
> > > >
> > > > bibhu wrote:
> > > > > Hi,
> > > > >
> > > > > I want to set up a webcam with my TS-7300.
> > > > > My TS-7300 runs the Linux that was shipped with it. No
> changes
> > > made.
> > > > >
> > > > > Can somebody please advise me about which cam to use and how
> to
> > > go
> > > > > about getting it working on the boardds?
> > > > > Any references/docs will be really helpful.
> > > > >
> > > > > Thanks,
> > > > >
> > > > > Bibhu
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Yahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|